
Article Quick Facts
Plastic Cup Sizes: Start With the Rim Diameter
A plastic cup sizes chart is useful only when it keeps caliber separate from capacity. In the beverage packaging industry, caliber refers to the outer rim diameter, while capacity describes the listed drink volume. The 90mm, 95mm and 98mm rows below are size references; the final lid fit still depends on the exact rim profile and sample check.
Cup Caliber & Lid Matching Chart
Use this reference chart to find the right lid for your beverage type. All Claropack cups are engineered to these precise tolerances.
| Caliber | Typical Volume | Compatible Lid Types | Material Type |
|---|---|---|---|
| 90 mm | 12oz, 16oz, 22oz | Flat, Dome, Sipper, Panda | PET or Injection PP |
| 92 mm | 650ml, 960ml | Square-fit Injection Lids | PP (Specialty Square) |
| 95 mm | 16oz, 22oz, 24oz | Universal Flat/Dome, U-shape lids | PET or PP |
| 98 mm | 16oz, 20oz, 24oz | High-clarity PET Flat/Dome | PET (US Standard) |
| 107 mm | 30oz, 32oz | Jumbo Flat/Dome | PET (Super-size) |
Flat vs. Dome vs. Sipper Lids
Which lid should you choose? Flat lids are cost-effective for standard iced coffees and teas. Dome lids are essential for drinks topped with whipped cream or fruit. Sipper lids (strawless) are becoming the preferred choice in eco-conscious markets to reduce plastic straw usage. At Claropack, our PET lids feature a "Snap-Lock" rim design to prevent accidental pops and leaks during delivery.
Article FAQs
The chart covers 90mm, 92mm, 95mm, 98mm and 107mm catalog caliber rows, with listed capacities and lid types shown where available.
Do not assume it can. A 3mm nominal difference can produce a poor fit; confirm the exact rim profile and test the selected cup-and-lid combination.
Custom lid and sealing-film options depend on the selected model and artwork. Ask the factory to confirm the specific mold, print and fit requirements.